Cross Wall Sconces for Chapels & Sanctuaries

Steel cross wall sconce lit at night, the cross reading as a dark silhouette against the washed wall

The fixture lights the wall above and below it. The cross stays dark.

A cross cut clean through heavy-gauge steel, lit from inside the fixture so the shape reads dark against a washed wall. Made one at a time in Fort Lauderdale, in runs sized for a building rather than a room.

What it does on a wall

Cross wall sconce in daylight, unlit
Daylight — a plain steel plate with a cross cut through it.
The same cross wall sconce lit after dark
After dark — the wall carries the light, the cross carries the eye.

The fixture throws light upward and downward, not outward. That matters in a sanctuary: the wall carries the glow, the cross sits in silhouette against it, and nobody in the pews is looking into a bulb. Down a side aisle, a row of them reads as rhythm rather than as a line of lamps.

It is a cut, not a print. The design is an opening in the steel plate, so there is no decal to lift and no printed panel to fade. Nothing about it changes with age except the finish.

Where these tend to go: sanctuary side walls, the narthex, an entry portico, a memorial garden or columbarium wall, the parish hall, a chapel of repose. Indoors or out — the same fixture does both.

Order the whole run at once

This is the one piece of advice worth taking seriously. Powder coat is mixed and cured in batches, and colour can vary slightly between production runs. Fixtures made together match each other exactly. Fixtures ordered a year apart may not.

If the plan is eight down the nave and two at the entrance, order ten now rather than eight now and two later. It costs less and they will match.

Ordering for a congregation?

Bulk pricing starts at ten fixtures. Tell us the size, the finish and how many, and we will come back with a price and a lead time — usually the same day.

Request a quote Call 1-754-444-3168

Monday–Thursday 8am–6pm ET, Friday 8am–5pm ET.

Cross wall sconce in black, front view

The Cross wall sconce — two sizes, black or oil-rubbed bronze, indoor or outdoor. In stock, ships within five business days with bulbs and mounting hardware included.

See the Cross sconce

Specifications

Sizes Small 10 × 6 × 3.4 in (3.8 lb) · Large 15 × 10 × 5.44 in (7.9 lb)
Finish Semi-gloss powder coat, black or oil-rubbed bronze
Construction Laser-cut steel, welded and riveted
Socket E26 porcelain lampholder, UL/cUL component listed #E105933
Maximum bulb 60 W, per the installation instructions
In the box 60-watt-equivalent LED bulbs, switchable between warm and cool white, plus mounting hardware
Wiring Hardwired — no plug. Mounts to a standard outlet box on the supplied crossbar. The box is not included, must be metal, and must be rated to carry 35 lb.
Exposed walls Add the sealed acrylic top where there is no overhang
Dispatch In stock — ships within 5 business days
Warranty 3 years on the fixture, 1 year on finish and electrical, 90 days on bulbs. Terms

Which size

The small suits a narthex, a hallway, a chapel of modest scale, or anywhere the congregation passes close to it. The large is the one for a sanctuary wall, a high ceiling or an exterior portico — anywhere it is read from across a room. On a tall wall a small fixture disappears.

A note on installation

These are hardwired fixtures. Use a qualified electrician where local code requires one, and check that the outlet box is metal and rated for the weight before the day of installation — it is the one thing that holds up a job. Allow about thirty minutes per fixture.

Tell us what you are lighting. Send the number of fixtures, the size and the finish, and we will quote it with a lead time.

Request a quote Browse the full range